# Ender 3 V2 - Pictures

### [![Ender 3 - Full Thingy.png](https://wiki.pwbstem.club/uploads/images/gallery/2024-05/scaled-1680-/ender-3-full-thingy.png)](https://wiki.pwbstem.club/uploads/images/gallery/2024-05/ender-3-full-thingy.png)

### **<span style="color: rgb(45, 194, 107);">Green - Belt Tensioners</span>**

<span style="color: rgb(255, 255, 255);">The belt tensioners are used to adjust the tension of the X and Y axis belts.</span>

### **<span style="color: rgb(224, 62, 45);">Red - Screen and Knob</span>**

<span style="color: rgb(255, 255, 255);">The screen is used to adjust settings and set things to print. Counter-Clockwise on the knob moves the cursor up, Clockwise on the knob moves the cursor down.</span>

[![main.jpg](https://wiki.pwbstem.club/uploads/images/gallery/2025-01/scaled-1680-/main.jpg)](https://wiki.pwbstem.club/uploads/images/gallery/2025-01/main.jpg)

<span style="color: rgb(255, 255, 255);">  
</span>

### **<span style="color: rgb(132, 63, 161);">Purple - Bed, Springs, and Knobs</span>**

<span style="color: rgb(255, 255, 255);">The Bed is where objects are printed. The Springs and Knobs are used for leveling the Bed.</span>

### **<span style="color: rgb(236, 202, 250);">Pink - Z-axis limit switch</span>**

<span style="color: rgb(255, 255, 255);">The Z-axis limit switch is used to tell the printer when the Z-axis is homed. Do not plug in on good printer.</span>

### <span style="color: rgb(53, 152, 219);">**Blue - Hot-End Assembly**</span>

<span style="color: rgb(255, 255, 255);">The Hot-End Assembly is where the Fan, Heating element, and nozzle is. The Z-axis probe to the left is only present on the good printer. Enables auto bed leveling.</span>

### **<span style="color: rgb(236, 240, 241);">White - Stepper Motors</span>**

<span style="color: rgb(255, 255, 255);">The stepper motors are the precise motors that move things around in the printer.</span>

### <span style="color: rgb(241, 196, 15);">**Yellow - Extruder**</span>

<span style="color: rgb(255, 255, 255);">The extruder is the stepper motor that controls the flow of filament into and out of the Hot-End Assembly via the Bowden tube. </span>

### **<span style="color: rgb(230, 126, 35);">Orange - LED Light Switch</span>**

<span style="color: rgb(255, 255, 255);">The switch controls the LED lights in the good printer.</span>

### **<span style="color: rgb(2, 238, 255);">Light Blue - Filament Holder</span>**

<span style="color: rgb(255, 255, 255);">Pretty self explanatory, holds the filament.</span>